The Depths of Hydraulic Fracturing and Accompanying Water Use Across the United States. by Robert B. Jackson, Ella R. Lowry, Amy Pickle, Mary Kang, Dominic DiGiulio, and Kaiguang Zhao. 2o15. ES & T, DOI: 10.1021/acs.est.5b01228
Download Acs%2Eest%2E5b01228
Abstract
Reports highlight the safety of hydraulic fracturing for drinking water if it 
occurs “many hundreds of meters to kilometers underground”. To our knowledge, however, no comprehensive analysis of hydraulic fracturing depths exists. Based on fracturing depths and water use for ∼44 000 wells reported between 2010 and 2013, the average fracturing depth across the United States was 8300 ft (∼2500 m). Many wells (6900; 16%) were fractured less than a mile from the surface, and 2600 wells (6%) were fractured above 3000 ft (900 m), particularly in Texas (850 wells), California (720), Arkansas (310), and Wyoming (300). Average water use per well nationally was 2 400 000 gallons (9 200 000 L), led by Arkansas (5 200 000 gallons), Louisiana (5 100 000 gallons), West Virginia (5 000 000 gallons), and Pennsylvania (4 500 000 gallons). Two thousand wells (∼5%) shallower than one mile and 350 wells (∼1%) shallower than 3000 ft were hydraulically fractured with >1 million gallons of water, particularly in Arkansas, New Mexico, Texas, Pennsylvania, and California. Because hydraulic fractures can propagate 2000 ft upward, shallow wells may warrant special safeguards, including a mandatory registry of locations, full chemical disclosure, and, where horizontal drilling is used, predrilling water testing to a radius 1000 ft beyond the greatest lateral extent.
Here is a story on the report.
Let the arguments begin!
"What surprised me is how often shallow fracturing occurs with large volumes of chemicals and water." - Robert Jackson, from the story.
Comments